Digital clock in VHDL

Digital clock in VHDL  | VHDL Digital Clock Program 

Program to create digital clock in VHDL, Source Code to create digital clock in VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

entity digi_clk is
port (clk1 : in std_logic;
      seconds : out std_logic_vector(5 downto 0);
      minutes : out std_logic_vector(5 downto 0);
      hours : out std_logic_vector(4 downto 0)
end digi_clk;

architecture Behavioral of digi_clk is
signal sec,min,hour : integer range 0 to 60 :=0;
signal count : integer :=1;
signal clk : std_logic :='0';
seconds <= conv_std_logic_vector(sec,6);
minutes <= conv_std_logic_vector(min,6);
hours <= conv_std_logic_vector(hour,5);

 --clk generation.For 100 MHz clock this generates 1 Hz clock.
if(clk1'event and clk1='1') then
count <=count+1;
if(count = 50000000) then
clk <= not clk;
count <=1;
end if;
end if;
end process;

process(clk)   --period of clk is 1 second.

if(clk'event and clk='1') then
sec <= sec+ 1;
if(sec = 59) then
min <= min + 1;
if(min = 59) then
hour <= hour + 1;
min <= 0;
if(hour = 23) then
hour <= 0;
end if;
end if;
end if;
end if;

end process;

end Behavioral;

Related Links :

No comments:

Post a Comment

If you face any Problem in viewing code such as Incomplete "For Loops" or "Incorrect greater than or smaller" than equal to signs then please collect from My Web Site CLICK HERE

More Useful Topics...


History Of C..

In the beginning was Charles Babbage and his Analytical Engine, a machine
he built in 1822 that could be programmed to carry out different computations.
Move forward more than 100 years, where the U.S. government in
1942 used concepts from Babbage’s engine to create the ENIAC, the first
modern computer.
Meanwhile, over at the AT&T Bell Labs, in 1972 Dennis Ritchie was working
with two languages: B (for Bell) and BCPL (Basic Combined Programming
Language). Inspired by Pascal, Mr. Ritchie developed the C programming

My 1st Program...

void main ()
clrscr ();
printf ("\n\n\n\n");
printf ("\t\t\t*******Pankaj *******\n");
printf ("\t\t\t********************************\n");
printf ("\t\t\t\"Life is Good...\"\n");
printf ("\t\t\t********************************");
getch ();

Next Step...


void main ()
clrscr ();
printf ("\n\n\n\n\n\n\n\n");
printf ("\t\t\t --------------------------- \n\n");

printf ("\t\t\t | IGCT, Info Computers, INDIA | \n\n");
printf ("\t\t\t --------------------------- ");

getch ();